New product from QTECH: an autonomous access point

QTECH presents a new product-a high-performance ceiling access point QWP-65-AC-VC of the 802.11 ac Wave2 standard with a bandwidth of up to 2100 Mbit/s. The new equipment is intended for installation inside buildings and premises. It works both independently and under the control of the QWM-VC controller.

QWP-65-AC-VC can be used both in operator-controlled Wi-Fi networks and in corporate networks that provide high-quality information traffic and are characterized by increased performance.

• three radio modules simultaneously operating in the 2.4 GHz and 5 GHz bands;
• the total data transfer rate in two bands is 2100 Mbit / s;
• latest Qualcomm IPQ4019+QCA9886+QCA8075 chipset;
• configuration and management using the QTECH QWC-VC Wi-Fi controller;
• support for Wave 2 technology;
• 256 QAM modulation
• complete with MIMO antenna (gain 5 dbi);
• power 500 MW;
• support for 256 end users; 
• simultaneous maintenance of 4 subscriber devices to increase productivity;
• Power supply Power over Ethernet IEEE 802.3 at 48V over a network cable;
• operating modes-AP, Repeater, WISP;
• automatic power adjustment function;
• the presence of a built-in spectrum analyzer for better use of the frequency range.

For more information about the access point, please contact the QTECH managers at sales@qtech.ru.

QWP-65-AC-VC

Indoor access point, 2.4 / 5 GHz, 802.11 a / n / ac, 802.11 b / g / n, PoE 802.3at, MIMO, coeff. gain 5 dBi, OFDM = BPSK, QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM; DSSS = DBPSK, DQPSK, CCK, 256 MB RAM + 32 MB, 12V DC.

QWP-65-AC

Indoor access point, 2.412-2.472 and 5.180-5.825 GHz, 300/1800 Mbps, 802.11 a / b / g / n / ac, PoE 802.3at, MIMO 2x2, MU-MIMO, eq. gain 5 dBi, OFDM = BPSK, QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM; DSSS = DBPSK, DQPSK, CCK, 256 MB RAM + 32 MB, external PSU (optional), PoE, 12V / 48V DC